Manufacturing Engineer - Lunar Operations (Mid - Senior)

Space Coast, FL Aerospace Full-time Posted Jul 27, 2026
Apply on Blue Origin (opens in a new tab) Sourced via blueorigin.wd5.myworkdayjobs.com · Posted 2026-07-27

About this role

Blue Origin is hiring a Manufacturing Engineer - Lunar Operations (Mid - Senior), full-time, on-site in Space Coast, FL, in the Aerospace sector.

Application close date:
Applications will be accepted on an ongoing basis until the requisition is closed.

At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We’re working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight!

This role is part of Blue Origin Operations, which is comprised of Integrated Supply Chain, Test Operations, Safety, Quality, and Mission Assurance. This includes Manufacturing and Supply Chain support across all Blue Origin facilities.

We are seeking experienced Manufacturing Engineers to join our Operations team at Blue Origin. In this role, you will own the design and implementation of efficient manufacturing systems, ensure stringent quality control throughout production, and optimize supply chain logistics across advanced lunar and spacecraft hardware domains. The ideal candidate is results-driven, skilled in resource management, and committed to high-quality standards. You will collaborate with cross-functional teams—including engineering, quality, supply chain, and production—to streamline processes, reduce costs, and accelerate build timelines. Leveraging cutting-edge technologies and methodologies, you will contribute to the continuous improvement of manufacturing techniques, ensuring Blue Origin’s continued innovation and excellence in aerospace engineering.

This is a pooling requisition for current and anticipated openings across multiple Lunar teams, shifts, and locations. Candidates will be matched to the right roles as needs are identified.

Role Specific Details:

-
Shifts: Multiple shifts available

-
Location: Space Coast, FL

-
Relocation: Available

-
Potential travel: Up to 10% for training and related activities (where applicable)

Responsibilities include but are not limited to:

-
Support the industrialization of new flight and payload hardware (solar arrays, avionics, structures, mechanisms, integration & test, GSE, and more).

-
Drive application and optimization of DFM, DFA, DFT across product lifecycle.

-
Translate engineering requirements into robust, repeatable manufacturing and assembly processes.

-
Collaborate closely with design engineering, quality, supply chain, and operations to integrate products and accelerate build.

-
Develop and maintain clear manufacturing documentation (work instructions, inspection plans, process flows, tooling).

-
Evaluate/implement new manufacturing tech: composites, advanced machining, additive, metrology, materials, automation, etc.

-
Lead, support, and document root cause investigations and drive corrective action.

-
Ensure strict compliance to standards (AS9100, ISO 9001, NASA, UL, AWS, etc.).

-
Own or support process FMEAs, risk assessments, equipment validation, and product qualification.

-
Identify opportunities for process improvement and cost reduction; advocate for Lean/DFx principles.

-
Mentor, coach, and support the technical development of engineers and technicians.

-
Represent Manufacturing Engineering in program, customer, supplier, and cross-functional reviews.

Team Focus & Domain Specialties:

Blue Origin’s integrated manufacturing teams enable the development, production, and lunar deployment of groundbreaking aerospace hardware. You will work within one or more core specialty domains:

-
Thermal & Fluid Systems| Lunar/spacecraft radiators, heat exchangers, active/passive thermal hardware. Cryogenic and fluid/propulsion systems, oxygen handling. Pressure vessel and tank integration, qualification, and test.

-
Structures & Integration | Complex aerospace structures, assemblies, pressure vessels, and large-scale mechanisms. Launch vehicle GSE, tooling, and multi-axis/mechanized fabrication. Structural analysis (FEA), design, fabrication, qualification, and NDT.

-
Tooling & Ground Support Equipment | Design, build, test, and commissioning of flight tooling, automated assembly tooling, mechanical fixtures, lifting rigs. PLC/motion control systems for mechanized/robotic tooling. Fabrication, maintenance, and integration for flight and ground support systems.

-
Solar Arrays & Avionics | Space-rated solar arrays: cell processing, wing/panel build, stringing, NASA standards. Avionics/harnesses, ESD/bonding, cleanroom practices, advanced test/metrology. Special electronic equipment development and integration.

-
Assembly, Integration & Test | Complete vehicle/subsystem assembly & build flow sequencing. System-level integration and test: tubing, harnesses, tanks, structures, propulsion, avionics. Ground and flight hardware integration, qualification, and certification.

Minimum Qualifications

-
Bachelor’s in Mechanical, Manufacturing, Electrical, Aerospace Engineering, or related discipline

-
Relevant Manufacturing Engineering experience: (3+ years Level II Engineer, 5+ years Level III Engineer, 8+ years Level IV Engineer)

-
Demonstrated experience creating clear, accurate manufacturing documentation (work instructions, BOM, flow diagrams)

-
Ability to work required shift and site, with flexibility for extended shifts/overtime as needed

-
Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Preferred Qualifications

-
Master’s/Advanced degree in relevant engineering field

-
Lean Six Sigma Greenbelt, PMP, or equivalent certification

-
Thermal/Fluid Systems: Hardware/system-level ownership, experience with spacecraft thermal control, pressure vessel and protection systems qualification; application of NASA, ASME, AWS, UL, and similar codes.

-
Structures & GSE: Experience designing, building, and qualifying complex aerospace structures, pressure vessels, GSE/tooling (flight or ground support equipment), multi-axis mechanical systems, PLC/motion control.

-
Solar Arrays/Avionics: Experience building/testing solar arrays, harnesses, panel/wings; proficiency with NASA-STD-8739.*, ESD cleanroom practices, electronics systems, advanced test methods; familiarity with safety-critical hardware.

-
Assembly, Integration & Test: Complex vehicle integration, subsystem troubleshooting, NPI, production transition, qualification, and certification.

-
Proficiency in one or more: NX, CATIA, Creo, SolidWorks, Teamcenter, Windchill, PLM/MRP/BOM management

-
Experience with advanced metrology (CMM, laser scanning), manufacturing automation, digital work instructions

-
Experience with analytical evaluation (DFM, DFA, FEA, tolerance/FMEA, NDT [visual, dye pen, ultrasound, X-ray, CT, EC, XRF])

-
Direct project ownership, technical leadership, and mentorship of engineering/operations teams

-
Experience leading cross-functional initiatives in new product development, design-to-production transition, or DFx advocacy

-
Exceptional communication skills; ability to represent manufacturing engineering expertise in cross-site teams, customer/supplier interfaces, and technical reviews

-
A record of mission assurance, world-class quality, and continuous improvement

Culture Statement

<

Description from Blue Origin's official posting. Always confirm details on the company careers page.

Apply on Blue Origin Applications go directly to Blue Origin. Curated by Larry Sherwood Jr.

About Blue Origin

Blue Origin

Company in the mobility sector tracked nightly on the Mobility Jobs board.

Ready to apply?
Apply on Blue Origin (opens in a new tab) You'll be redirected to blueorigin.wd5.myworkdayjobs.com to complete your application.

Not the one? Get new Aerospace roles by email, weekday mornings, only when something new lands.

Larry Sherwood Jr.

About Larry Sherwood Jr.

Talent Acquisition Leader specializing in mobility, EV, and frontier tech. 1,200+ hires across roles ranging from production technicians to VPs, including 48 hires for the AFEELA U.S. launch at Sony Honda Mobility (98% offer acceptance, about $1.5M in agency fees avoided). SHRM-CP certified. Build recruiting functions from scratch, no agencies.

SONY HONDA MOBILITYFISKERSHRM-CP1,200+ HIRES

Currently open to senior TA leadership roles in the United States. larrysherwoodjr.com · Projects · References · Contact Larry

Read Larry's guides →
Job no longer open? Let me know

Curated by Larry Sherwood Jr. on the free Mobility Jobs board. Pulled nightly from company applicant tracking systems. Apply directly on the source link above to be considered.