Systems Integration and Test Engineer, Avionics and Electronics

CA eVTOL Full-time $115k to $155k Posted Nov 6, 2026
Apply on Joby Aviation (opens in a new tab) Sourced via careers-jobyaviation.icims.com · Posted 2026-11-06

About this role

Joby Aviation is hiring a Systems Integration and Test Engineer, Avionics and Electronics, full-time, on-site in CA, in the eVTOL sector.

Company Overview

Joby Advanced Development designs, develops, and flight-tests novel aircraft using a software-first autonomy approach. We build and deploy autonomy, perception, planning, and radar systems across conventional, electric, and hydrogen-electric aircraft in both CTOL and VTOL configurations.

Overview

Joby's Advanced Development group is looking for a Systems Integration and Test Engineer to take commercial off-the-shelf (COTS) avionics and electronic line-replaceable units (LRUs) from datasheet to a flight-ready, configuration-controlled installation on a new autonomous aircraft. You'll own everything in between. That means deciding whether a chosen unit will actually work in our operating environment, planning how it gets integrated, and testing it at the component and system level. It also means defining the configuration every following aircraft is built to.This is a hands-on role. Expect about half your time at the bench, the Iron Bird, or the aircraft. The other half goes to writing the plans, procedures, and configuration records that make that work repeatable. The environment is fast and thrives on lean process and a cohesive team atmosphere.

Responsibilities

Evaluate selected COTS LRUs (sensors, radios, power conversion, data acquisition) against system requirements and the aircraft's operating environment. Identify gaps in environmental, EMI, power quality, and interface performance. Recommend a mitigation, additional testing, or an alternative unit

Develop an integration plan for each LRU. It should cover interface definition, power and data connectivity, mounting and thermal needs, test sequence, and entry and exit criteria from bench to Iron Bird to aircraft

Write and execute component-level test procedures: receiving inspection, functional, acceptance, and environmental screening. Produce clear pass/fail evidence

Bring up LRUs on the bench and in the Iron Bird/HIL environment. Debug power, interface, timing, and communication faults across hardware, firmware, and software boundaries

Define and maintain LRU configuration so the as-built aircraft matches the as-designed one. This covers part numbers, hardware and firmware revisions, software loads, configuration files, settings, and pinouts

Author ICDs for LRU electrical and data interfaces. Work with EWIS engineers to turn pinouts and connector definitions into harness requirements, and with Software to integrate each LRU into Superpilot, Joby's internally developed autonomy software stack

Write integration and test procedures that technicians can execute on recurring builds, and support technicians through first installs

Work directly with vendors on documentation gaps, firmware issues, and failure investigations

Support test readiness and flight clearance with Flight Software, GNC, Flight Test, and Airworthiness

Required

B.S. in Electrical, Computer, or Aerospace Engineering or a related field with 4+ years of relevant experience, or 7+ years of equivalent hands-on experience with demonstrated engineering responsibility

Hands-on experience integrating and testing electronic hardware in aircraft, UAS, spacecraft, automotive, or similar systems

Working knowledge of common interfaces (CAN, RS-232/422/485, ARINC 429, Ethernet, discrete I/O) and 28VDC power distribution

Fluency with oscilloscopes, DMMs, programmable supplies, protocol analyzers, and bus monitors

Experience writing test procedures and documenting results with traceability to requirements

Ability to read and produce schematics, wiring diagrams, and pinout definitions

Scripting in Python or similar for test automation, data capture, or unit configuration

Ability to work independently with limited documentation and support

This position must meet US export control compliance requirements, therefore a candidate must qualify as a “US Person” as defined by 22 C.F.R. § 120.15. “US Person” includes US Citizens, lawful permanent residents, refugees, or asylees.

Desired

Environmental and EMI qualification experience (DO-160, MIL-STD-810, MIL-STD-461), including judging when vendor data is sufficient and when it isn't

Experience with low-pressure, low-temperature, or high-altitude environments, such as arcing and corona, reduced convective cooling, and cold soak

Iron Bird, HIL, or SIL bring-up and operation

Configuration management in a PLM system (Enovia or similar), first article inspection, and ATP authorship

Integration of GNSS, air data, IMU, datalink, or flight control computer hardware

Familiarity with ARP4754A and DO-254 concepts as applied to COTS hardware

Prior technician background (A&P, military avionics, electronics technician)

Additional Information

Compensation at Joby is a combination of base pay and Restricted Stock Units (RSUs). The target base pay for this position is $115,200 - $155,000/yr. The compensation package will be determined by job-related knowledge, skills, and experience.

Joby also offers a comprehensive benefits package, including paid time off, healthcare benefits, a 401(k) plan with a company match, an employee stock purchase plan (ESPP), short-term and long-term disability coverage, life insurance, and more.

Description from Joby Aviation's official posting. Always confirm details on the company careers page.

Apply on Joby Aviation Applications go directly to Joby Aviation. Curated by Larry Sherwood Jr.

About Joby Aviation

Joby Aviation

eVTOL air taxi developer with FAA Part 135 certification and Toyota partnership. Santa Cruz, CA.

Ready to apply?
Apply on Joby Aviation (opens in a new tab) You'll be redirected to careers-jobyaviation.icims.com to complete your application.

Not the one? Get new eVTOL roles by email, weekday mornings, only when something new lands.

Larry Sherwood Jr.

About Larry Sherwood Jr.

Talent Acquisition Leader specializing in mobility, EV, and frontier tech. 1,200+ hires across roles ranging from production technicians to VPs, including 48 hires for the AFEELA U.S. launch at Sony Honda Mobility (98% offer acceptance, about $1.5M in agency fees avoided). SHRM-CP certified. Build recruiting functions from scratch, no agencies.

SONY HONDA MOBILITYFISKERSHRM-CP1,200+ HIRES

Currently open to senior TA leadership roles in the United States. larrysherwoodjr.com · Projects · References · Contact Larry

Read Larry's guides →
Job no longer open? Let me know

Curated by Larry Sherwood Jr. on the free Mobility Jobs board. Pulled nightly from company applicant tracking systems. Apply directly on the source link above to be considered.