Lead Assembly Integration & Test Technician

Pasadena, CA Aerospace Full-time Posted Nov 18, 2026
Apply on Rocket Lab (opens in a new tab) Sourced via job-boards.greenhouse.io · Posted 2026-11-18

About this role

Rocket Lab is hiring a Lead Assembly Integration & Test Technician, full-time, on-site in Pasadena, CA, in the Aerospace sector.

ABOUT ROCKET LAB

Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity’s reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us.

SPACE SYSTEMS

At Rocket Lab, we’re not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more.

Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it’s a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions.

LEAD ASSEMBLY INTEGRATION AND TEST TECHNICIAN

Rocket Lab Robotics specializes in high-performance robotic systems and precision mechanisms that enable the most ambitious space missions, including NASA’s Mars Perseverance Rover and CADRE lunar rovers. Leveraging Mars-proven expertise from Motiv Space Systems, we deliver scalable, flight-proven solutions – such as robotic arms, motion control systems, and solar array drive assemblies (SADAs) – to support planetary exploration, satellite servicing, and national security missions.

Based out of Pasadena, CA the Lead Assembly, Integration & Test (AI&T) Technician will support the assembly, integration, and testing of advanced spaceflight hardware, including robotic systems, precision electromechanical actuators, motion control electronics, optomechanical assemblies, and other high-reliability spacecraft components.

The Lead AI&T Technician serves as a senior technical resource and working lead for manufacturing technicians performing complex mechanical, electrical, and electromechanical assembly, integration, and test activities. This position is responsible for coordinating daily technical activities, providing hands-on guidance to other technicians, and ensuring that assigned manufacturing and test operations are executed in accordance with approved engineering documentation, quality requirements, and production schedules. The successful candidate will possess extensive hands-on aerospace hardware experience, strong troubleshooting capabilities, demonstrated technical leadership, and the ability to work effectively with multidisciplinary engineering and manufacturing teams.This position requires a high degree of technical independence, attention to detail, and commitment to workmanship in a high-mix, low-volume aerospace manufacturing environment.

WHAT YOU’LL GET TO DO:

Assembly and Integration

  • Lead and perform precision mechanical, electrical, and electromechanical assembly operations supporting development, qualification, and flight hardware.
  • Assemble and integrate complex robotic mechanisms, actuators, motor assemblies, gear trains, sensors, electronics, wiring harnesses, and associated spacecraft hardware.
  • Interpret engineering drawings, assembly procedures, schematics, wiring diagrams, and technical specifications.
  • Perform precision mechanical assembly operations requiring controlled fits, alignments, torque application, bonding, and specialized tooling.
  • Integrate mechanical, electrical, and electronic subsystems into completed hardware assemblies.
  • Ensure assembly activities comply with approved work instructions, manufacturing procedures, and applicable workmanship standards.
  • Identify assembly difficulties, design discrepancies, and manufacturing constraints and coordinate resolution with Engineering.
  • Support implementation of engineering changes, process improvements, and revised assembly methods.

Hardware Testing and Troubleshooting

  • Lead and perform functional, electrical, mechanical, and system-level testing of integrated hardware in accordance with approved procedures.
  • Set up, configure, and operate test equipment, fixtures, instrumentation, and data acquisition systems.
  • Conduct functional verification, performance testing, acceptance testing, and qualification testing as required.
  • Perform electrical measurements, continuity checks, signal verification, motor operation testing, and other applicable test activities.
  • Troubleshoot complex mechanical, electrical, and electromechanical assembly and test issues.
  • Analyze test results, identify anomalies, and coordinate technical investigations with Integration & Test Engineering and Design Engineering.
  • Ensure test data, results, and associated documentation are accurately recorded and maintained.
  • Support environmental testing, including vibration, thermal vacuum, and other qualification activities as applicable.
  • Assist with the development and validation of new test setups, fixtures, and procedures under engineering direction.

Technical Leadership and Work Coordination

  • Serve as the technical lead for assigned assembly, integration, and test activities.
  • Provide daily technical direction and hands-on support to manufacturing and test technicians.
  • Coordinate work assignments and execution priorities with the Production Manager.
  • Monitor progress of assigned technical activities and communicate constraints, risks, and schedule impacts.
  • Provide technical guidance on complex assembly methods, specialized tooling, and test equipment.
  • Assist with training, mentoring, and technical qualification of less-experienced technicians.
  • Promote consistent workmanship, documentation practices, and adherence to established procedures.
  • Identify opportunities to improve technician efficiency, technical capabilities, and cross-training.
  • Support troubleshooting and resolution of technical issues that exceed the capabilities of less-experienced personnel.

Manufacturing Documentation and Quality

  • Ensure assembly, integration, and testing activities are performed in accordance with approved manufacturing documentation.
  • Review applicable drawings, work instructions, travelers, and test procedures prior to executing assigned activities.
  • Maintain accurate manufacturing records, assembly documentation, test results, and hardware traceability.
  • Verify completion of required manufacturing operations and documentation prior to advancing hardware through subsequent production steps.
  • Identify and document nonconforming hardware, workmanship defects, and test anomalies.
  • Support Quality Assurance and Engineering investigations, corrective actions, and hardware disposition activities.
  • Maintain appropriate handling, cleanliness, foreign object debris prevention, and electrostatic discharge controls.
  • Ensure compliance with applicable aerospace workmanship standards, quality procedures, and customer requirements.
  • Support inspection, first article, and product acceptance activities as required.

Manufacturing Readiness and Process Improvement

Description from Rocket Lab's official posting. Always confirm details on the company careers page.

Apply on Rocket Lab Applications go directly to Rocket Lab. Curated by Larry Sherwood Jr.

About Rocket Lab

Rocket Lab

Company in the mobility sector tracked nightly on the Mobility Jobs board.

Ready to apply?
Apply on Rocket Lab (opens in a new tab) You'll be redirected to job-boards.greenhouse.io to complete your application.

Not the one? Get new Aerospace roles by email, weekday mornings, only when something new lands.

Larry Sherwood Jr.

About Larry Sherwood Jr.

Talent Acquisition Leader specializing in mobility, EV, and frontier tech. 1,200+ hires across roles ranging from production technicians to VPs, including 48 hires for the AFEELA U.S. launch at Sony Honda Mobility (98% offer acceptance, about $1.5M in agency fees avoided). SHRM-CP certified. Build recruiting functions from scratch, no agencies.

SONY HONDA MOBILITYFISKERSHRM-CP1,200+ HIRES

Currently open to senior TA leadership roles in the United States. larrysherwoodjr.com · Projects · References · Contact Larry

Read Larry's guides →
Job no longer open? Let me know

Curated by Larry Sherwood Jr. on the free Mobility Jobs board. Pulled nightly from company applicant tracking systems. Apply directly on the source link above to be considered.